You may also be interested in the following products:
Longer harder nipples always look sexy and they are extra sensitive too. We've included everything you'll need one back plate, one front plate, locating bar and 4 screws. To affix, remove your piercing, position the back plate over your nipple (centrally). Place the top plate on the back plate. Stick the bar through your piercing and rest it on the top plate, insert each screw, slowly twisting each one in small amounts to evenly stretch your nipple. The crossbar measures in at 2mm in diameter making it a12ga.
Please note, care should be taken not to over stretch your nipple as the piercing may rip. Set includes ONE nipple trainer.
Delivery & Returns
|SKU / Product Code||80906|
|Inner Diameter||Ring 1.6cm (0.6 inch)|
|Size||The crossbar measures in at 2mm in diameter making it a12ga.|
|Contents||One nipple trainer (2 rings, 4 screws and one cross bar)|
|Customer Review Summary|
|4 Reviews (1)|| |
- Fiddly but it works
Can be fiddly to fit (a thicker base ring with deeper indents for the end of the screw might help); I found that to prevent the screws from being unseated I had to stretch the nipple a bit more than I wanted to, but this depends on the conditions of use - if you are moving about with clothes rubbing on the device it is more likely to come undone.
The 2mm rod is sufficient to hold the nipple proud of the body but I found using existing 4mm jewellery also worked.
To obtain further extension either longer screws would be required or some shims under the base ring, but I'm not quite at that stage yet.
You can also use the Monarch Noir Nipple Clamp on the extended nipple if you allow one of the screws to pass inside of the jaws of the clamp.
Worth the effort to fit if you've got the time, and I look forward to having more fun with it.