You may also be interested in the following products:
Due to the overwhelming popularity of our Spiral Chastity Device we decided to make the same great chastity device in body safe stainless steel! Our original Spiral Chastity Device was made from iron which is prone to rust if not cared for properly so we’ve gone out and updated the design. We still offer both styles so you can wear your iron one for short term chastity and your stainless steel one for long term.
The spiral design of this chastity device allows you to see the goods but keeps them out of reach. You’ll love the light weight build, some have said they forget they are even wearing a chastity device at all! You’ll receive the new updated spiral chastity device in body safe stainless steel, a padlock with two keys and three cock rings 40mm, 45mm and 50mm.
Note: The video mentions that the inner diameter of the cage is 35mm. The cage of the spiral chastity device now has an inner diameter which measures 39mm.
Delivery & Returns
|SKU / Product Code||92662|
|Inner Diameter||Cage - 39mm. Cock rings - 40mm, 45mm, 50mm|
|Length||Cage only: Short: 8.5cm (3.35 inches), regular: 11.5cm (4.5 inches) Overall length: Short: 10cm (3.9 inches), Regular: 14cm (5.5 inches)|
|Overall Diameter||5cm (1.96 inches)|
|Size||Internal length measured from the centre of the cage to the centre of the last ring following the curve of the device. Similar to where your urethra would be positioned.|
Spiral Stainless Steel Male Chastity Device Video
|Customer Review Summary|
|5 Reviews (25)|| |
|4 Reviews (10)|| |
|3 Reviews (4)|| |
|2 Reviews (4)|| |
|1 Reviews (3)|| |
- Secure, comfortable brilliant!
Beautifully secure, the cock is fully visable which is great. My cock has a very hard time expanding to entirely fill the cage as it is quite narrow which restricts erections even more. When it does fill whole cage the visual effect is fantastic.
I have been wearing it for over 48 hour now and very comfotable, like the wieght which you do not get with plastic. Fine under jeans when I went for a long walk.
- Excelent product
I am currently on day 3 of wearing this 24/7. When will it be removed and when will I finnally get some relief I do not know it could be days or it could months. The good thing about this device is that it is comfortable enough to wear that it does not worry me.
It is a big improvement on the iron version of this device as even though my keyholder was allowing me to remove it for cleaning and drying nightly the rust from the iron version was causing an iritation and making long term use uncomfortable. No worrys with this version though as three days in and cleaning is easy to do without removal.
I cannot masturbate with this device so cheating my chastity is impossible and although not relevant since playing this way with my wife I have seen her confidence skyrocket.
Only complaint is the packaging. My original device came in a nice box and was very well presented which kinda helped with the shock factor when handing to my wife. This device however came in bubble wrap no real packaging to speak of.
Overall I love it. The really really loves it and I would recomend it.
- Cock cage
My stainless steel cock cage arrived about two weeks ago. It is a fantastic bit of kit. Highly polished, got a bit of weight to it, far better than the plastic types. I wear mine 24/7, and forget it is there till I want the loo. It looks fantastic. I have enjoyed all kinds of cock cages over the years, and this is the best yet. A lot easier to keep clean because it is so open but still very restrictive to the penis. When I get an erection, there is no room to expand into, and because there is no lubricant my 'tool' does not move right to the end, that makes it feel even better, because it is struggling to expand and can't. Once again the best bit of kit ever. I don't know what more I can say about it.
- In my place
My Wife/Mistress has decided She no longer needs my clitdick and has ordered me to find a cage for it. She decided I will never cum again and told me to find one that was comfortable as She did not want me to suffer in pain, just in desperation. I have been in the device for a week now and I find it very wearable, no chaffing just squeezing my tiny balls into a different position. I was a perpetual masturbater, I have tried with the device on to no avail ! I am mentally preparing myself for a life of castration in this well built contraption. My Wife says I will forget I ever had a cock after wearing this device for a while, I am beginning to hope She's correct !
- Super Comfy, but Super Defeatable
While I sincerely wish I could echo Alan's assertion that he could not masturbate while in the device, I cannot. Have not had an orgasm in 5 months. Have been locked in another spiral cage that got rusty inside the tip, even with daily removal for deep cleaning. So when I saw this, it was like WOWWWW! But alas, the bars are too thin, too much of the underside of the head is exposed, and within seconds of attempting naughtiness I had to stop to avoid actually having an orgasm. It was like I wasn't even wearing a cage! :(
What would be SUPER AWESOME is if the cage could be re-designed with less open room at the underside of the tip, and perhaps to also make it less flexible so the exposed surface area of the shaft could not be increased by slight bending.
- Well built, comfortable, and secure
My new Spiral Stainless Steel Male Chastity Device arrived this morning, replacing my CB6000s which had split after minimal use. I was keen therefore to try my first metal chastity device. Other than looking for something that would be more long lasting, I was also interested to see how this device would retain/contain my penis when flaccid, especially after normal day to day activities. I often found that with the CB6000 even with the s tube, i found my penis slipping back down the tube, thus spoiling the experience and sensation.
Well the good news is, that after some initial manipulation and practice I managed to put on the new Spiral Stainless Steel Male Chastity Device on, and using the tried and tested method of pulling my penis through and into the device using a pop sock, without any problem. My initial opinion and experience is that the device seems very well made and relatively easy to put on. It seems very comfortable, and does a much better job at holding my penis in place.
The only bad thing to report is that for some reason the padlock, supplied with the device, while fitting and securing the cage in place, it does not move freely when locked. This means that it sticks out right angles to the cage, and apart from making it more likely to be visible, it also pokes into your leg when sitting or walking. I had to purchase a smaller lock.
- So Promising, BUT!
The Stainless Steel construction, square post so that the lethal two location posts weren't needed, 3 cock rings rather than the promised 2, the quality of welding all promised a CB that was fitted for long term wear - BUT
The housing of the square post and the loose positioning of the hole for the lock meant that there was movement between the two components, which in combination with the poor fit of the post to the cock ring and the sharp edge of the square post housing meant the penis skin was pinched. A good deal of work with file and sandpaper could slightly allay these problems, but just a little more thought was needed in the first place?
Saying it was lightweight in the video in practice meant it could easily be bent, the spine that held the rings of the cock cage in place was far too flimsy. This was good if you wanted to bend the cage into a circle to encompass a longer penis, but certainly doesn't give you the feeling of a strong secure restraint.
The rings only had an internal diameter of 32mm, not the 35mm promised, and were much thinner than expected from the impression given in the video. The thickness of these rings might be a personal preference, however my experience is that when the back-most ring is this thin in long term wear a pressure odema can form on the skin in contact with the underside of this ring.
Back to the good points though, the hole at the front of the cage is surrounded by excellent smooth stainless steel which I managed with difficulty to drill out to encompass my 10mm Prince Albert ring, It would be good if the size of this hole could be ordered as a customizable option.
Please bring out a mark 2 version which encompasses these changes and you will have a product which can proudly and genuinely live up to the title of being a Chastity Belt.
- Comfortable Chastity
This is the seventh Chastity device that I have bought, and the first that I have been able to wear long term. It is a bit fiddly to get on, but once it is on it is very secure and quite comfortable - very little of the pinching that I experienced with previous purchases. My only wish is that you produced a smaller model - even when I get excited I nowhere near fill the cage.
- happily locked in this one
Great value stainless cage with quality welds and 3 rings for a good fit, what's not to like? Unless you want to pay for a custom fit device, this will serve you well. No movement on my one at the post, as the hole for the padlock is perfectly positioned to just clear the square mounting sleeve. Flexible? Yes. Bars too thin? No. Ring on cage not inducing a pressure sore or oedema for me, either. Well done, UberKinky, a very well deserved 5 stars here.
- Utterly shocking quality!
Got this by courier today.Have to say as a repeat customer to uberkinky I was utterly shocked with the quality of this device.
Firstly out of the 3 rings provided only one of them has a bore big enough for the lock to go through,which only leaves the medium one usable.
Secondly,the device itself had almost completely straightened itself out under mild pressure while putting it on,it is totally flimsy in construction as I'm assuming the "backbone" part that the rings are attached to is much too thin.
All in all the product is unusable and I assume unreturnable as it has been used as I tried to put it on.This makes me think hard on whether I'd buy from your company again,though I'm sure you cannot guarantee the quality of every product,this was extremely poor by any standard.
UberKinky Response: Because this chastity device is unusable due to the padlock holes you can return this item for an exchange or full refund.
My mistress has decided I will never cum again, I will be locked up on a permanent basis. I am 60 and want something I can wear in comfort that will keep my flaccid 3 inch penis well contained and unable to expand. I cannot decide which of your products would be best.
Hope this helps!
If my slave puts his cock and balls through the ring, he will just be able to pull them out as easily ?
Hope this helps!
Hi. Do you know if there is an improved Mark 2 version in the pipeline?
One modified to address the issues raised in the review by "Bargain Hunter"
While trying out different cock ring sizes I've found stainless steel to irritate my skin, particularly if worn during sex. I'm led to believe that there are differing grades of stainless with varying nickel content, this being the metal which is probably the irritant.
Have there been any cases of wearers reporting itching or pain from this device, please?
Unfortunately the general make up of 316 stainless steel does contain anywhere between 6-22% nickel and from what we hear anything containing below 5% nickel content can be classified as nickel free. It is possible that you may be experiencing contact dermatitis from the nickel content in the device. We have not received any reports of itching or pain as a result from wearing any of our stainless steel chastity device but this is not to say that it doesn't happen. In future to stay on the safe side, you may want to stick to hypo-allergenic materials such as plastic, resin or silicone.
Hi, I am not too sure about which size I should go for: when soft my penis is quite small (5/6 cm i'd say) , but it gets about 19 cm when hard. As I'd like it to stay small (and possibly shrink -?- ), I was thinking of getting the Short model. Do you think it would be a good choice or there's a risk it could be painful/too uncomfortable to wear?
I cannot figure out weather to go for the the short or regular spiral stainless steel chastity devise.
When soft i measure 6,5 - 7 cm, any recomendations?
My girlfriend put me into chastity 4 week's ago, using a CB3000. However, We have had to remove the device, as it had caused significant chafing damage underneath my testicles, actually breaking the skin. I was using the largest 50mm ring. Last night we reappointed the CB3000, but I was in significant pain again after 15 minutes. I would like to switch to asreel device with a more rounded shape to the profile of the ring tube and the SSSMCD looks to tick the boxes. However, the largest ring size is only 45mm! Will this fit me, or can I get a larger ring size? Many Thanks
Hope this helps!
Could this potentially be worn with a ball closure ring in a prince albert piercing? I have a PA piercing which I'd like to keep and, without going down an expensive custom build route, it is proving difficult to find something suitable. I'm looking for a stainless steel cage and this looks like it could work.
It might mean a little shifting and getting adjusted depending on where the ring sits while you're inside the cage but the holes in the end of the cage should be able to accommodate most PA rings as long as it's not a massive gauge. Hope this helps!
Thanks for the prompt answer to the question I sent you last week about a different item.
I now have a question about this.
I bought a stainless steel Spiral from you about a year ago, and it came with 2 base rings - both of which I found too small. At the time you guys told me that a 3rd, bigger ring would soon be available.
1- Is the 50mm ring included here the bigger ring you mentioned?
2- Can i buy it separately?
3- I notice that the NON-stainless steel Spiral now has a 3rd bigger base ring available (and available separately) But it seems to have a tube-shaped pin rather than the squared pin that the steel Spiral has.
If the steel Spiral 50mm base isn't available separately (and if not, why not??) then would the non-steel 50mm ring fit the steel Spiral, or is the pin the wrong shape?
Anyway I hope that all makes sense!
i would very much like to get a bigger, 50mm base ring for the stainless steel Spiral I have.
Thanks as always.
Here are the answers to your questions:
1. Yes, this is the larger ring I mentioned before. It measures 50mm.
2. The ring will be available to be purchased separately soon, we are waiting for an order to come in from our manufacturer. The item number will be 83643 and it will be £9.99. I don't have an ETA just yet because it is a rather large consignment of made to order items.
3. These two devices are from two separate overseas manufacturers which we then had to ask for 50mm rings to be custom made for the UK market. This would explain the gap in availability between the two. I have tested the compatibility between the steel ring and the stainless steel device and unfortunately they do not fit together.
is the internal diameter of this new cage 32mm 35mm or 39mm please confirm
I am looking for my first chastity device and have no idea what size cage to get.
I know what size ring I need so that isn't a problem, however I am unsure what size cage to get - particularly as there is a lot of conflicting information out there!
My length when flaccid is between 3.25 and 3.75 inches.
When fully erect I am almost 7 inches.
Based on those measurements should I be looking at the smaller or the larger cage?
Any idea when this will be back in stock? I've been checking for a while :( also will you get both the regular and short back in stock at the same time?
could you please confirm cage diameter and length for the short version also is image shown short or long version many thanks ian
All measurements for all products can be found in the additional information section on every product page. it is below the product description. The item in the image is the short version, I am still waiting for images of the long version to come in from our photographer. The inner diameter of the cage is 39mm. the length of the short cage is 2.75 inches from the final ring to the tip on the inside not counting the cock ring. The overall diameter of the cage is 5cm (1.96inches).
Hiya - I'm asking about the sizing - trying to decide which length. I'm finding it difficult working out what the length refers to, as the device is curved.
Any chance of a diagram, with the length marked on the diagram?
The measurement was taken with a flexible tape measure which followed the curve of the cage at the centre of the rings. There are two measurements. One taken with the cock ring installed and locked into place (this is from the outer edge of the cock ring to the inside surface at the end of the cage) and the other without the cock ring. (this is from the outer edge of the last ring of the cage without the cock ring to the inside surface at the end of the cage.)
What is the inner diameter of the spiral chastity device.
All measurements for our products can be found in the Additional Information portion of our product pages lower down on the screen. The inner diameter measurements for this chastity device are: Cage - 32mm. Cock rings - 40mm, 45mm, 50mm. Hope this helps!
Was wondering whether to go for short or long. My cock is just short of 4 inches erect
Question. Have purchased the spiral stainless steel chastity device and am very pleased with function of it. But problem is in time having burning sensation with medium sized back ring under ball sack so try large ring and sometimes a testicle tries to pop threw between cage and ring with what I call horrid pain. Is there something wrong I'm doing or is there ring available between medium and larger ring . I'm thinking 47.5mm. Thank you for a great product. My wife is pleased I'm trying to ease her worries of cheating.
I would like to know if there is any anti pull out measures I can make for the spiral stainless steel. I’m already using the smallest ring but it seems my penis is still too thin and can be easily pulled out. Especially when my balls hang low.
Sorry, there are not currently any anti-pullout devices designed for the Spiral Stainless Steel Chastity Device. I've given it some thought and I can't think of any methods for preventing pull out on that device. I will continue to give it a think and I will speak with the manufacturer to see if we can come up with something.
I bought the spiral chastity device from you recently. It seems to have a thread in the central hole. Is there a compatible catheter you can supply?
We sell two different styles of catheters, a red rubber catheter and a silicone foley style catheter